PUBLICATIONS
A.
Book
1. T. Asano, M. F. Mina and Y.
Fujiwara, A Survey of Polymer Crystallization by X-ray Diffraction, SKP Inc.,
Shizuoka, Japan, ISBN 978-4-9903540-01-7, Printed (2006). Library link
2.
M. F. Mina, T. A. Mobarak
and M. J. Rahman, Physics Part I and II, Text Books
for Higher Secondary Education, Approved by NCTB,
Alam Book House (Jupitar Publications), Dhaka, Bangladesh, Printed (2015).
B. Book Chapter
3. M. D. H. Beg, M. F. Mina, R. M. Yunus
and A. K. M. Moshiul Alam,
"The Use of Oil Palm Biomass (OPB) Fibers as reinforcement in
Composites", In: Biofiber reinforcements in
composite materials, Ed. Omar Faruk and Mohini Sain, UK, Woodhead Publishing Limited, Woodhead
Publishing Series in Composites Science and Engineering No. 51, ISBN 978-1-78242-122-1,
August, (2014). Publisher link
C.
Research Articles: [Refereed Journals with Impact
Factor (IF):
2013/2014]
1. T.
Asano, M. F. Mina and I. Hatta, Twin Formation Mechanism in the
Solid-Solid Phase Transition of Normal Hexatriacontane
(n-C36H74), Journal of the Physical Society
of Japan, 65, 1699-1704, (1996). IF=1.475. Journal link
2. M.
F. Mina, T. Asano, H. Takahashi, I. Hatta, K. Ito
and Y. Amemiya, Dynamic Investigation of the
Solid-Solid Phase Transition of Normal-Alkane (Hexatriacontane) by Simultaneous Measurement with
Differential Scanning Calorimetry, Small-Angle
X-ray Scattering and X-ray Television Detector, Japanese Journal of Applied
Physics,36,
5616-5622, (1997). IF=1.127. Journal link
3.
T. Asano, F. J. Balta Calleja, A. Flores, M. Tanigaki,
M. F. Mina, C. Sawatari, H. Itagaki, H. Takahashi and I. Hatta,
Crystallization of Oriented Amorphous Poly(ethylene terephthalate)
as Revealed by X-Ray Diffraction and Microhardness,
Polymer, 40,
6475-6484, (1999). IF=3.766. Journal link
4.
T. Asano, Y. Yamamoto, M. F. Mina, Y.
Fujiwara, H. Takahashi and I. Hatta, Melting
Behavior of the Orientedβ-phase Polypropylene
Texture Crystallized by the Temperature Slope Method, Journal of Macromolecular
Science Part B-Physics, B38, 163-175, (1999). IF=0.74. Journal link
5.
M.
F. Mina, T. Asano, R. Nuryadi, C. Sawatari, H. Takahashi and I. Hatta,
Effect of Homologous Impurity on the Solid-Solid Phase Transition of Normal-Alkane (Hexatriacontane)
Crystal Studied by Time-Resolved X-Ray Measurements, Japanese Journal of
Applied Physics, 38, 164-170, (1999). IF=1.127. Journal link
6.
T. Asano, M. F. Mina, A.
Nishida, S. Yoshida and Y. Fujiwara, Crystallization of a low molecular
weight Polyethylene and Paraffins under a
Temperature Gradient, Journal
of Macromolecular Science Part B-Physics, B40
(3&4), 355-367, (2001). IF=0.74. Journal link
7.
M.
F. Mina, T. Asano, N. C. Dafader, F. Akthar, S. Yoshida, N. Tohyama,
K. Imaizumi, Effect of Monomers in the Structural
Modification of Natural Rubber during γ-Ray Irradiation ,Journal of
Macromolecular Science Part B-Physics, B43 (2), 295-305, (2003). IF=0.74. Journal link
8.
M. Boyonova, M.
F. Mina, F.J. Balta Calleja
and S. Fakirov, Effect of SBS Compatibilzer
on the Interphase Boundary of Polymer Blends of
Polystyrene and Natural Rubber, e-polymers,
3(1), 615-621 (no. 047, 1-7), (2003). IF=0.569. Journal link
9.
M. M. Alam, M.
F. Mina, F. Akthar, Effect of Gamma Rays in the
Preparation of Polymer and Hydrogel from Acrylamide Monomer, Chinese Journal of Polymer Science,
21(4), 437-442, (2003). IF=1.835. Journal link
10.
M. M. Alam, M.
F. Mina and F. Akthar,
Swelling and Hydration Properties of Acrylamide Hydrogel in Distilled Water, Polymer Plastic
Technology & Engineering, 42
(4), 533-542 (2003). IF=1.481. Journal link
11.
M.
F. Mina, M. M. Alam, F. Akthar,
S. Yoshida, N. Tohyama, K. Imaizumi
and T. Asano, Centrifuging Effect on the Structure and Property of Natural
Rubber Latex Films, Polymer Plastic Technology & Engineering, 42
(4), 513-514, (2003). IF=1.481. Journal link
12.
M. M. Alam, F. Akthar, M. F. Mina, N.
C. Dafader and A. I. Mustafa, Studies of γ-Ray
Induced Polymerization of Aqueous Acrylamide, Polymer Plastic Technology
& Engineering, 42 (2), 285-296, (2003). IF=1.481. Journal link
13.
M.
F. Mina, M. E. Haque, F. J. Balta
Calleja, T. Asano and M. M. Alam,
Microhardness Studies of the Interphase
Boundary in Rubber-Softened Glassy Polymer Blends Prepared with/without Compatibilizer, Journal of Macromolecular Science Part
B- Physics, B43(5), 1005-1015, (2004). IF=0.74. Journal link
14.
M.
F. Mina, F. Ania, T. A. Huy,
G. H. Michler and F. J. Balta
Calleja, Micromechanical Behavior and Glass
Transition Temperature of Poly (methyl methacrylate)/Rubber
Blend, Journal of Macromolecular Science Part B- Physics, B43(5),
947-961, (2004). IF=0.74. Journal link
15.
M. A. Chowdhury, M. M. Alam, M. F. Mina, F. Akthar
and S. E. Kabir, Optimization of Synthesis and
Characterization of Acrylamide Hydrogel
by γ-ray Irradiation, Chinese
Journal of Polymer Science, 22(3), 253-258, (2004). IF=1.835. Journal link
16.
M.
F. Mina, T. Asano, B. Poirier, D. Mondieig, A. Wuerflinger and C. Josefiak,
Thermal and X-ray Measurements on n-Hexatriacontane,
Journal de Physique IV, France (Journal of Physics IV, France), 113,
35-38, (2004). IF=0.351.
Journal link
17.
M.
F. Mina, F. Ania, F.J. Balta
Calleja and T. Asano, Microhardness
Studies of PMMA/Natural Rubber Blends, Journal of Applied Polymer Science,
91, 205-210, (2004). IF=1.64. Journal link
18.
M.
F. Mina, A. K. M. M. Alam, M. N. K. Chowdhury, S. K. Bhattacharia,
and F. J. Balta Calleja
Morphology, Mechanical and Thermal Properties of Undeformed
and Mechanically Deformed Poly (Methyl Methacrylate)/Rubber
Blend, Polymer Plastic Technology & Engineering, 44, 523-537,
(2005). IF=1.481. Journal link
19.
M.
F. Mina and M. M. Alam, Swelling Behavior of Acrylamide Hydrogel in
Different Solvents and pHs, Chinese Journal of Polymer Science, 23(3),
269-274 (2005). IF=1.835.
Journal link
20.
F. Ania, G. Broza, M. F. Mina, K. Schulte,
Z. Roslaniec, F. J. Balta
Calleja, Micromechanical Properties of Poly(butylene Terephthalate) Nanocomposites with Single- and Multi-walled Carbon Nanotubes, Composite
Interfaces, 13 (1), 33-45, (2006). IF=0.726. Journal link
21.
M. N. K. Chowdhury, M.
F. Mina, A. K. M. M. Alam, F. Akhtar, Synthesis of Polyelectrolyte and Studies of its
Conductivity Changes with Respect to Molecular Weight, Polymer Plastic Technology
& Engineering, 13 (1), 33-45, (2006). IF=1.481. Journal link
22.
M.
F. Mina, M. N. K. Chowdhury, A. K. M. M. Alam, S. Bhattachariaya and G.
H. Michler, Studies of Micromechanical Deformation
Processes In Particle-Filled Glassy Polymer, Polymer Plastic Technology
& Engineering, 45, 1-7, (2006). IF=1.481. Journal link
23.
T. Uchiyama, M. Suyama,
M. M. Alam, T. Asano, S. Henning, A. Flores, F.
J. Balta Calleja and
M. F. Mina, Layer Structure Formation in Oriented Poly
(ethylene terephthalate) Relating to
Micromechanical Properties, Polymer, 48,
542-555, (2007). IF=3.766. Journal link
24.
M.
F. Mina, S. Seema, R. Matin,
M. J. Rahman, R. B. Sarker,
M. A. Gafur and M. A. H. Bhuiyan,
Improved performance of isotactic
polypropylene/titanium dioxide composites: Effect of processing conditions
and filler, Polymer Degradation and Stability, 94, 183-188, (2009).
IF=3.163. Journal link
25.
T. Asano, T. Furusho, M.
M. Alam, Y. Tamba, C. S.
and M. F. Mina, Laser Light and X-Ray Diffraction Studies of
the Oriented Isotactic Polypropylene Prepared by
the Temperature Slope Crystallization, Journal of Macromolecular Science Part B-Phyisics, 48, 774-788, (2009). IF=0.74. Journal link
26.
M.
F. Mina, Nasima Banu, Abdur Razzak, Md. Jellur Rahman, Md. Abdul Gafur and Md. Abu Hashan Bhuiyan, Structures and performance of white-clay filled isotactic-polypropylene composites prepared by
double-molding techniques, Polymer Plastic Technology and Engineering,
41, 1275-1281, (2009). IF=1.481. Journal link
27.
M.
F. Mina, M. A. Haque, M. K. H. Bhuiyan,
M. A. Gafur, Y. Tamba,
and T. Asano, Structural, Mechanical and Thermal Studies of Double-molded Isotactic Polypropylene Nanocomposites
with Multi-Walled Carbon Nanotubes, Journal of
Applied Polymer Science, 118, 312-319, (2010). IF=1.64. Journal link
28.
M. A. Gafur, R. Nasrin, M.
F. Mina, A. H. Bhuiyan, Y. Tamba, and T.
Asano, Structures and properties of the compression-molded istactic-polypropylene/talc composites: Effect of cooling
and rolling, Polymer Degradation and Stability, 95, 1818-1825, (2010). IF=3.163. Journal link
29.
A. H. Bhuiyan, M. F. Mina, S. Seema, M. M.
Khan, M. J. Rahman, M. A. Gafur,
Structural, elastic and thermal properties of titanium dioxide filled isotactic polypropylene, Journal of Polymer
Research, 18, 1073-1079, (2011). IF=1.920. Journal link
30.
M. E. Cagiao, F. J. Balta Calleja, F. Spieckermann, S. Scholtyssek, M. F. Mina, M. A. H. Bhuiyan,
X-ray diffraction study of iPP/clay and iPP/TiO2 composites relating to micromechanical
properties, Journal of Applied Polymer Science, 124(4), 3147-3153, (2012). IF=1.64. Journal link
31.
M.
F. Mina, M. A. Haque, M. A. Gafur
and T. Asano, Effect of Rolling Deformation on the Structures and Properties
of Multi-Walled Carbon Nanotubes Filled Isotactic Polypropylene, Polymer International,
61, 545-553, (2012). IF=2.409. Journal link
32.
M. A. Haque, M. F.
Mina, A.K.M. M. Alam, M. J. Rahman, M. A. H. Bhuiyan, and
T. Asano, Multi-Walled Carbon Nanotubes Reinforced Isotactic Polypropylene Nanocomposites:
Enhancement of Crystallization and Mechanical, Thermal and Electrical
Properties, Polymer
Composites, 33, 1094-1104, (2012). IF=1.632. Journal link
33.
M. N. K. Chowdhury, M.W.
Khan, M. F. Mina, M. D. H. Beg, Maksudur
R. Khan and A. K. M. M. Alam, Synthesis and
characterization of radiation grafted films for removal of arsenic and some
heavy metals from contaminated water, Radiation Physics and Chemistry, 81,
1606-1611, (2012). IF=1.38. Journal link
34.
A. K. M. Moshiul Alam, M. D. H. Beg, D. M. Reddy Prasad, M. R. Khan and M.
F. Mina, Structures and Performances of Simultaneous Ultrasound and
Alkali Treated Oil Palm Empty Fruit Bunch Fiber Reinforced Poly(Lactic Acid)
Composites, Composites
Part A: Applied Science and Manufacturing, 43, 1921-1929, (2012). IF=3.07. Journal link
35.
M. R. Islam, M. D. H. Beg, A. Gupta and M.
F. Mina, Optimal Performances of Ultrasound Treated Kenaf Fibre Reinforced Recycled
Polypropylene Composites as Demonstrated by Response Surface Method, Journal of Applied Polymer
Science, 128(5), 2847-2856, (2013). IF=1.64. Journal link
36.
M.
F. Mina, M.D.H. Beg, M. R. Islam, A. Nizam, A. K. M.
M. Alam and R M. Yunus,
Structures and Properties of Injection Molded Biodegradable Poly(Lactic Acid)
Nanocomposites Prepared with Untreated and Treated
Multi-Walled Carbon Nanotubes. Polymer
Engineering & Science, 54(2), 317-326, (2014). IF=1.52. Journal link
37.
M.
F. Mina, H. S. Shorowardy, Mubarak A Khan, A. K. M.
M. Alam, M.D.H. Beg, Improved mechanical
Performances of Triple Super Phosphate Treated Jute-Fabric Reinforced
Polypropylene Composites Irradiated by Gamma Rays. Journal of Applied
Polymer Science, 130(1), 470-478, (2013). IF=1.64. Journal link
38.
M. N. K. Chowdhury, M.
D. H. Beg, Maksudur R. Khan and M. F. Mina,
Synthesis of copper nanoparticles and their
antimicrobial performances in natural fibres. Materials Letters, 98,
26-29, (2013). IF=2.489. Journal link
39.
M. N. K. Chowdhury, M.
D. H. Beg, Maksudur R. Khan and M. F. Mina,
Modification of oil palm empty fruit bunch fibers by nanoparticle
impregnation and alkali treatment. Cellulose, 20,
1477-1490, (2013). IF=3.033. Journal link
40.
M. D. H. Beg, S. Samahani,
M. F. Mina and R. M. Yunus, Simultaneous
effects of coupling agent and flame retardant on empty fruit bunch
fiber/polypropylene composites. Journal
of Reinforced Plastics & Composites, 32(17), 1268-1284, (2013). IF=1.188. Journal link
41.
M. K. H. Bhuiyan, M. M. Rahman, M. F. Mina, M. R. Islam, M. A. Gafur, A. Begum, Crystalline Morphology and Properties of
Multi-Walled Carbon Nanotube Filled Isotactic Polypropylene: Influence of Filler Size and
Loading. Composites
Part A: Applied Science and Manufacturing, 52, 70-79 (2013). IF=3.07. Journal link
42.
M. N. K. Chowdhury, M.
D. H. Beg, Maksudur R. Khan and M. F. Mina,
Copper nanoparticles for improving the mechanical
performances of oil palm empty fruit bunch fibers as analyzed by Weibull Model. Polymer
Bulletin, 70, 3103-3113, (2013). IF=1.438. Journal link
43. M. R.
Islam, M.D.H. Beg and M. F. Mina, Fibre
Surface Modifications through Different Treatments with the help of Design
Expert Software for Natural Fibre Based Biocomposites. Journal
of Composite Materials, 48(15), 1887-1899, (2014). IF=1.257. Journal link
44. M. K.
Alam, M. T. Islam, M. F. Mina, M. A. Gafur, Structural, Mechanical, Thermal and Electrical
Properties of Carbon Black Reinforced Polyester Resin Composites. Journal of Applied Polymer
Science, 131(13), 40421(1-11), (2014). IF=1.64. Journal link
45.
M. H. S. Shohrawardy, M.
K. Alam, M. F. Mina and Mubarak A.
Khan, Fabrication of Strong
and Thermally More Stable Jute-Fabric/Polypropylene Composites by Compression
Molding along with g-Ray Irradiation. Polymer Bulletin,
71(5), 1219-1239, (2014). IF=1.438. Journal link
46.
A. K. M. M. Alam, M.
F. Mina, M. D. H. Beg, A. A. Mamun, A.K. Bledzki and Q. T. H. Shubhra,
Thermo-Mechanical and Morphological Properties of Short Natural Fiber
Reinforced Poly (Lactic Acid) Biocomposite: Effect
of Fiber Treatment. Fibers
and Polymers, 15(6), 1303-1309, (2014). IF=1.113. Journal link
47.
A. K. M. M. Alam, M. D.
H. Beg, , M. F. Mina, A. A. Mamun,
and A.K. Bledzki, Degradation and Stability of Oil
Palm Empty Fruit Bunch Fiber Reinforced Poly (Lactic Acid) Biocomposite: Effect of Fiber Length. Journal of Composite Materials,
49(25), 3103-3114, (2015). IF=1.257. Journal link
48.
M. N. K. Chowdhury, M.
D. H. Beg, Maksudur R. Khan and M. F. Mina,
and A. F. Ismail, Copper nanoparticle in cationized palm oil fiber: physico-chemical
investigation. Colloid
and Polymer Science, 293 (3), 777-786, (2015).
IF=2.410. Journal link
49.
M. D. H. Beg, A. K. M. Moshiul Alam, R. M. Yunus,
M. F. Mina, Improvement of interaction
between pre-dispersed multi walled carbon nanotubes
and unsaturated polyester resin. Journal
of Nanoparticle Research, 17,
53 (1-13), (2015). IF=2.278. Journal link
50.
M. R. Islam, A. Gupta, M. Rivai, M. D. H. Beg and M. F. Mina, Effects of fibre surface treatment on the properties of hybrid
composites prepared from oil palm empty fruit bunch fibres,
glass fibres and recycled polypropylene, Journal of Applied Polymer
Science, 133(3), 43049(1-10), (2016). IF=1.64.
51.
A. K. M. Moshiul Alam, M. D. H. Beg, R. M. Yunus, M. F. Mina, K.H.
Maria and T. Mieno, Evolution of
functionalized multi-walled carbon nanotubes by dendritic polymer coating and their anti-scavenging
behavior during curing process,
Materials Letters, 167, 58-60, (2016). IF=2.489. Journal link
D.
Research Articles: (Refereed Journals without Impact Factor)
52.
T. Asano, R. Nuryadi, Y. Shibata, M. F. Mina, Investigation of the Molecular Orientation of Polyethylene in the Supercooled Melt State by X-ray Diffraction, J. Fac.
Sci. Shizuoka Univ., Japan, 32, 45-51 (1998).
Journal link
53.
M. F. Mina, T. Asano and C. Sawatari, Physical and
Thermal Properties of Even n-Alkanes, J. Fac.
Sci. Shizuoka Univ., Japan, 32, 53-63 (1998). Journal link
54.
T. Asano, A. Saeki and M. F. Mina,
Crystallization of Poly (ethylene terephthalate)
Observed by X-Ray and Light Scattering Measurements, J. Fac. Sci.
Shizuoka Univ., Japan, 33, 23-32
(1999). Journal link
55.
T. Asano, Y. Shibata, M. F. Mina and R. Nuryadi, Observation of the Crystallizing Front by
Optical Microscope-TV System, J. Fac. Sci. Shizuoka Univ., Japan, 33, 33-40 (1999). Journal link
56.
A. Wuerflinger, M. F. Mina, T. Asano and K. Higashi, Studies of
Phase Transitions of Alkanes by Means of Thermal
Measurements and X-ray Analysis, J. Fac. Sci., Shizuoka Univ., 37, 27-40, (2003). Journal link
57.
M. M. Alam, F. Akthar, M. F.
Mina, H. Rashid and A. I.
Mustafa, Characterization of Acrylamide Hydrogel Prepared by γ-Ray Irradiation, Nuclear
Science and Application, 12(1&2),
41-45, (2003).
58.
M. F. Mina and S. Akhbar, Versatile Applications of Microindentation Tests in the Characterization of
Polymers and Their Blends, Bangladesh Journal of Physics, 1(1), 84-94, (2004).
59.
M. F. Mina, T. Asano and F. Akhtar, Studies on Cold-Drawn
Crystallization and Mechanical Properties of Natural Rubber Produced in
Bangladesh,
Nuclear Science and Application, 15, No.2, 46-50, (2006).
60.
M. F. Mina and T. Asano, Fourier Analysis of Lamellar Structure of n-C36H74
Crystal Studied by X-Ray Diffraction and Thermal Measurements, Bangladesh
Journal of Physics, 4, 75-84, (2007).
61.
T. Datta, M. I. Ali, M. F. Mina, I. Kamal, D. K.
Saha and A. H. Khan, Study of Crystal Structure,
Dielectric Properties and Particle Size of Ba0.6Pb0.4TiO3
Ceramic Oxide Prepared by Polymer Matrix Precursor Rout, Bangladesh
Journal of Physics,4, 27-36,
(2007).
62.
M. F. Mina, and F. J. Balta Calleja, Correlation of Microhardness
to Yield Stress and Microstructures Developed in
Core-Shell-Particles-Toughened Poly (Methyl Methacrylate),
Bangladesh Journal of Physics, 3, 113-124, (2007).
63.
M. F. Mina, G. H. Michler and F. J. Balta
Calleja, Glass Transition Temperature and Microhardness of Compatible and Incompatible Elastomer/Plastomer Blends, Journal of
Bangladesh Academy of Sciences, 33, No.1, 15-24, (2009).
Journal link
64.
T. A. Mobaraka, M. F. Mina and M. A. Gafur,
Material Properties of Acetylated Jute-Mat Composites, Journal of
Scientific Research, 591, 13-23,
(2013). Journal link
65.
N. Parvin, M. S. Ullah, M. F.
Mina and M. A. Gafur, Structures and mechanical properties of talc and
carbon black reinforced high density polyethylene composites: Effects of
organic and inorganic fillers, Journal of Bangladesh Academy of
Sciences, 17(1), 11-20, (2013). Journal
link
66.
T. A. Mobaraka, M. F. Mina and M. A. Gafur,
Physico-mechanical, Thermal and Activation Energy
Studies of Jute-Mat/ Poly(vinyl chloride) sandwich composites, Journal
of Bangladesh Academy of Sciences,
39(1), 13-23, (2015). Journal link
E. Proceeding's Papers
67.
T. Asano, S. Yoshida, A.
Nishida, and M. F. Mina, Space Resolved X-ray Diffraction Measurements of the Supercooled State of Polymers, Proceedings of the Photon Factory
Meeting, KEK, Tsukuba, Japan, p. 30-33, December 19-20, (2000).
68.
M. A. Khan, M. F. Mina
and L. T. Drzal, Influence of Silane
Coupling Agents of Different Functionalities on the Performance of
Jute-Polycarbonate Composite, Proceedings of the 3rd International
Wood and Natural Fibre Composites Symposium,
Kassel, Germany, page 5-1 to 5-25, Sep. 19-20, (2000).
69.
C. Fonseca, A. Ochoa, C. Gonzalez, P. Cardin, M. F. Mina and F. Ania, Determinacion del estado de orientacion en compuestos de PE
con fibras de celulosa mediante medidas de microdureza, Materiales
Compuestos, 05, 171-178 (2005).
70.
M. A. Haque, M. K. H. Bhuiyan, M. F.
Mina, M. A. Gafur, Y. tamba and T Asano,
Structure and proeprties of injection-molded isotactic polypropylene and multi-walled carbon nanotubes composites, International Conference
on Magnetism and Advanced Materials (ICMAM-2010), Dhaka, Bangladesh, 03-07 March, pp 227-230 (2010).
71.
M. F. Mina, A. K. M. M. Alam, M. D. H. Beg and R. M. Yunus, Effect of Alkali and Simultaneous Ultrasound-Alkali
treatments on the Performances of Oil Pump Empty Fruit Bunch Fibers,
ICBBVAP-2012, 23-24 October, pp.-- (2012), Kuala Lumpur, Malaysia.
72.
M. N. K. Chowdhury, M. D. H.
Beg and M. M. R. Khan, M. F. Mina, Synthesis, characterization and antimicrobial
performances of copper nanoparticles, The 2nd
International Conference on Engineering and Applied Science (2013 ICEAS),
15-17 March, (2013), Tokyo, Japan.
F. Patents
1. Maksudur R. Khan, M. D.
H. Beg, M. N. K. Chowdhury, M. F. Mina and R. M. Yunus, Copper nanoparticles
reinforced firbres and method of formation thereof.
Application
No.: PI 2013700349, Reference No.: P100-UMP-00095, Malaysia, (2013).
2. M. D. H. Beg, Maksudur R. Khan, R. M. Yunus, M. F. Mina and A. K. M. M. Alam, Natural fibers reinforced polyester resin
composites and method of formation thereof. Application No. PI 2013700405,
Reference No.: P100-UMP-00105, Malaysia, (2013).
G. Internal Reports
1. M. F. Mina, F. Akhtar
and M. E. Haque, Phase Boundary in Compatible and
Incompatible Polymer Blends Studied by Microindentation
Test and Microscopic Observations, Internal Report,
INST-93/NRCD-16, Atomic Energy Research
Establishment, Bangladesh Atomic Energy Commission, (2003).
2. M. F. Mina and M. E. Haque Development of Crystal Structure
in Natural Rubber during Uniaxial Deformation as
Revealed by X-ray Scattering Method, Internal Report, INST-93/NRCD-18,
Atomic Energy Research Establishment, Bangladesh Atomic Energy Commission,
(2004).
H. Reports
1. M. F. Mina, T. Asano. H. Takahashi, I. Hatta, K. Ito and Y. Amemiya, A
Study with the Simultaneous Measurements Using DSC, SAXS and WAXS During the
Solid-Solid Phase Transition of n-Alkane, Photon
Factory Activity Report, High Energy
Accelerator Research Organization, KEK, Tsukuba, Japan, 14, 341
(1996).
2. M. F. Mina, T. Asano, R. Nuryadi, M. Tanigaki, C. Sawatari, H. Takahashi and I. Hatta,
Investigation of the Impurity Effect on the Solid-Solid Phase Transition of
n-Alkane Crystals by Time-Resolved Measurements, Photon
Factory Activity Report, High Energy
Accelerator Research Organization, KEK, Tsukuba, Japan, B15, 194
(1997).
3. T. Asano, R. Nuryadi, M. F. Mina, Y. Shibata, C. Sawatari, K. Ito and Y. Amemiya,
A Study of Supercooled Melt-State of Polyethylene
by a Microslit X-ray Diffraction, Photon
Factory Activity Report, High Energy
Accelerator Research Organization, KEK Tsukuba, Japan, B15, 193
(1997).
4. T. Asano, S. Yoshida, A. Nishida, M.
F. Mina, S. Nakamura and Y. Amemiya,
Investigation of Molecular Orientation of Polyethylene in the Supercooled-Melt State, Photon Factory Activity Report, High Energy Accelerator Research
Organization, KEK, Tsukuba, Japan, 17, 209 (1999).
5. T. Asano, A. Nishida, S. Yoshida, M.
F. Mina, R. Nishio and S.
Katayama, Observation of a Crystal Growth Plane of Normal-Alkanes,
Photon
Factory Activity Report, High Energy Accelerator Research Organization, KEK, Tsukuba,
Japan, 17, 210 (1999).
6. M. F. Mina, N. C. Dafader
and F. Akhtar, Structure Property Correlation of
Natural Rubber Grafted with Monomers using γ-ray Irradiation", Technical
Report, January 1999- December 2001, Atomic Energy
Research Establishment, Dhaka, Bangladesh, p. 55 (June, 2003).
7. M. F. Mina, F. Akhtar
and N. C. Dafader, Studies of γ-Ray Induced
Polymerization of Aqueous Acrylamide, Technical
Report, January 1999- December 2001, Atomic Energy
Research Establishment, Dhaka, Bangladesh, p. 60 (June, 2003).
I. Conferences, Seminars and Symposiums
1. T. Asano, M. F. Mina, I. Hatta, H. Takahashi, Simultaneous
Measurement of Solid-Solid Phase Transition of Hexatriacontane
using DSC and SAXS, Annual Conference of Physical Society of Japan. 2aT7,
October 9-11, (1996).
2. T. Asano, M. F. Mina, I. Hatta and H. Takahashi, Mechanism of
solid solid phase transition of hexatriacontane,
Annual conference of the Physical Society of Japan, 3AD3, April 03-05,
(1996).
3. M. F. Mina, T. Asano, H. Takahashi, I. Hatta, K. Ito and Y. Amemiya,
"Time-Resolved X-Ray Diffraction in the Study of the Solid-Solid Phase
Transition of Even n-Alkane, Proceedings of the
Satellite Meeting on Crystallographic Application of SR, KEK, Tsukuba, Japan,
page 557-568, July 31-August 1, (1997).
4. T. Asano, S. Yoshida, A. Nishida, and M.
F. Mina, Space Resolved X-ray Diffraction Measurements of
the Supercooled State of Polymers, Proceedings of
the Photon Factory Meeting, KEK, Tsukuba, Japan, p. 30-33, December 19-20,
(2000).
5. M. F. Mina, F. Akhtar,
S. Akbar and T. Asano, Study of Crystalline Orientation During Cold Drawing
of Natural Rubber Films, Biennial Symposium on Physics and Modern
Development, March 30-31, (2002).
6. M. M. Alam, F. Akhtar,
and M. F. Mina, Electrochemical Property of Polyelectrolyte Solutions, Silver Jubilee
Conference, Bangladesh Chemical Society, PS-2.12, January 11-13, (2003).
7. M. M. Alam, F. Akhtar,
and M. F. Mina, Studies of gamma-ray irradiation synthesis of Hydrogel
from Acrylamide Monomer, Silver Jubilee Conference,
Bangladesh Chemical Society, PS-2.10, January 11-13, (2003).
8. M. F. Mina, M. M. Alam,
F. Akhtar, and T. Asano, Structural Modification of
Natural Rubber by Monomer during Gamma-ray Induced Grafting, Silver Jubilee
Conference, Bangladesh Chemical Society, OP-2.4, January 11-13, (2003).
9. M. F. Mina, M. M. Alam,
F. Akhtar, and T. Asano, Effect of Centrifugation
on Structural Modification of Rubber Film Produced From Natural Rubber Latex,
Silver Jubilee Conference, Bangladesh Chemical Society, OP-2.3, January
11-13, (2003).
10. M. F. Mina, F. Akhtar,
and F. J. Balta Calleja,
Morphology, Mechanical and Thermal Properties of Undeformed
And Mechanically Deformed Plastic/Rubber Binary Blends, International
Conference on Physics for Understanding and Applications, Bangladesh Physical
Society, February 22-24, (2004).
11. M. F. Mina and T. Asano, Fourier
Analysis of Lamellar Structure of n-C36H74 Crystal
Studied by X-Ray Diffraction and Thermal Measurements, Annual Conference,
Physics Education and Employment, Bangladesh Physical Society, V-CP-5, May
04-05, p. 26 (2007).
12. M. F. Mina, G. H. Michler
and F. J. Balta Calleja,
Glass Transition Temperature and Microhardness of
Compatible and Incompatible Blends, CPO-VI-05, December 02-04, p.21 (2007).
13. M. F. Mina, N. Banu,
R. Matin, M. J. Rahman,
M. A. Gafur and A. H. Bhuiyan,
Mechanical, Thermal and Electrical Properties of Polypropylene/White-Clay
Composites, Bose Conference on Contemprorary
Physics, LCPTF-9, March 19-21, p. 78 (2008).
14. M. F. Mina, N. Banu,
R. Matin, M. J. Rahman,
M. A. Gafur and A. H. Bhuiyan,
Mechanical, Thermal and Electrical Properties of Polypropylene/White-Clay Composites,
National Symposiam on Advanced Materials, 15-16
January, (2008).
15. M. F. Mina, International Physics
Conference, 15-17 May, (2009), Dhaka, Bangladesh.
16. M. A. Haque, M. K. H. Bhuiyan,
M. F. Mina, M. A. Gafur, Y. Tamba,
and T. Asano, Structure and Properties of Injection Molded Isotactic Polypropylene Multi-Walled Carbon Nanotubes Composites, International Conference on
Magnetism and Advanced Materials (ICMAM-2010), 03-07 March, (2010), Dhaka,
Bangladesh.
17. M. A. Haque, M.
F. Mina, M. A. Gafur, Y. Tamba, and T. Asano, Effect of Rolling Deformation on the
Structures and Properties of Multi-Walled carbon Nanotubes
Filled Isotactic Polypropylene, National Conference
on Physics for Development, bangladesh physical
society, 10-11 February, (2011), Dhaka, Bangladesh.
18. T. A. Mobarak, M. A. Gafur,
and M. F. Mina, Material Properties of Acetylated Jute-Mat Composites, National
Conference on Physics for Development, Bangladesh Physical Society, 10-11
February, (2011), Dhaka, Bangladesh.
19. M. F. Mina, A. K. M. M. Alam, M. D. H. Beg and R. M. Yunus,
Effect of Alkali and Simultaneous Ultrasound-Alkali treatments on the
Performances of Oil Pump Empty Fruit Bunch Fibers, ICBBVAP-2012, 23-24
October, (2012), Kuala Lumpur, Malaysia.
20. M. K. Chowdhury, M. D. H. Beg, M. K. Khan and
M. F. Mina, Synthesis and Characterization of Nano
Copper Particles and their Impregnation in Oil Palm Empty Fruit Bunch Fibers,
ICBBVAP-2012, 23-24 October, (2012), Kuala Lumpur, Malaysia.
21. N. Parvin, M. S. Ullah,
M. F. Mina and M. A. Gafur, Comparative study of
mechanical properties of talc and carbon black reinforced high density
polyethylene composites. International Conference on Physics Today, March
15-16, (2012), Bangladesh University of Engineering, Dhaka, Bangladesh.
22. M. R. Islam, M. D. H. Beg, A Gupta and M.
F. Mina, Surface modification of Kenaf
fibre through ultrasound in processing of recycled
polypropylene based composites. 5th International Conference on Postgraduate
Education (5th ICPE), 18-19 Dec, (2012), Universiti
Teknology Malaysia, Johor Bahru,
Malaysia.
23. M. D. H. Beg, M. F. Mina, M. R. Islam, A. Nizam, A. K. M. M. Alam and R M. Yunus,
Characterization of Biodegradable Nanocomposites
with Poly (Lactic Acid) and Multi-Walled Carbon Nanotubes.
ICCM 2013: International Conference on Composite Materials, January 30-31, (2013),
Dubai, United Arab Emirates.
24. M. D. H. Beg, A. K. M. Moshiul Alam, M. F. Mina, A. A. Mamun and A. K. Bledzki,
Natural Fiber reinforced Biocomposites: Effect of
Fiber Treatments by Ultrasound. ICCM19: 19th International Conference on
Composite Materials, July 28- August 02, (2013), Montreal, Canada.
J. Awards
1. M. D. H. Beg, Maksudur R. Khan, R. Prasad, M.
N. K. Chowdhury, M.
F. Mina and R. M. Yunus,
Development of good quality bio-hydrogel for wound
healing using jatropa latex. CITREX,
UMP, 27-28 March, (2102), Malaysia, (Bronze Medal).
1. M. D. H. Beg, I Ahmed, R. M. Yunus, Maksudur R. Khan, R. Prasad, M. N. K. Chowdhury,
M. F. Mina, An economical modified polyester centrifugal pump housing, ITEX, 23rd
International Invention, Innovation and Technology Exhibition, 17-19 May, (2012),
Malaysia, (Bronze Medal).
|